IMB-1000D-WF Mini-ITX Motherboard

Processor System

CPU	Intel® Bay Trail SoC Processor J1900, QC, 2.00GHz, 10W
Chipset	SoC
BIOS	AMI SPI 64 Mbit

Form Factor

Dimensions	Mini-ITX (6.7-in x 6.7-in, 17.0 cm x 17.0 cm)

Memory

Technology	Dual Channel DDR3L 1333 MHz
Capacity	16 GB (8GB per DIMM)
Socket	2 x 204-pin SO-DIMM

Graphics

Controller	Intel® Gen7 Graphics DX 11
HDMI	HDMI 1.4a Max resolution up to 1920x1200@60Hz
VGA	Max resolution up to 1920x1200@60Hz
MultiDisplay	Dual Display

Expansion Slot

mini-PCIe	1 x Full/Half size with PCIe x1 and USB 2.0
M.2	1 x M.2 (Key M, 2260) with PCIe x1 (Optional for VPU)

Audio

Interface	Realtek ALC887, High Definition Audio Header

Ethernet

Controller/ Speed	LAN1: Realtek RT8119I with 10/100/1000 Mbps LAN2: Realtek RT8119I with 10/100/1000 Mbps LAN3: Intel® I210IT with 10/100/1000 Mbps LAN4: Intel® I210IT with 10/100/1000 Mbps (Optional: LAN4 supports POE function by ASRI PSE module)
Connector	4 x RJ-45

Rear I/O

HDMI	1 x HDMI 1.4a
Ethernet	4 x 1 Gigabit LAN
USB	1 x USB 3.1 (Gen1), 3 x USB 2.0

Internal Connector

USB	2 x USB 2.0 (1 x 2.54 pitch header)
COM	2 x COM(RS232/422/485), 4 x COM(RS-232)
GPIO	4 x GPI, 4 x GPO
TPM	TPM Header
LVDS	N/A
VGA	1
SATA PWR Output	1
Speaker Header	1
PS/2	1

Storage

M.2	1 x M.2 (Key M, 2242/2260/2280) with SATA2 for SSD
SATA	1 x SATA2 (3Gb/s)

Watchdog Timer

Output	From Super I/O to drag RESETCON#
Interval	256 Segments, 0, 1, 2, ...255sec

Power Requirements

Input PWR	12V DC-In (with 4-pin wafer PWR cable or DC Jack)
Power On	AT/ATX Supported - AT : Directly PWR on as po wer input ready - ATX : Press button to PWR on after po wer input ready

Environment

Operating Temp	0ºC ~ 60ºC
Storage Temp	-40° C ~ 85° C
Operating Humidity	5% ~ 90%
Storage Humidity	5% ~ 90%

Accessories

Gift Package	2 x SCREW M2,D=5.3 (13G020302010AK) 2 x SCREW FOR WIFI CARD (13G020305011AK) 1 x I/O Shield THIN (13G020563010AK) 2 x COM Cable (14G000000310AK) 1 x SATA Data Cable (14G00010107DAK) 1 x SATA Power Cable (14G000100410AK)
Bulk Package	2 x SCREW M2,D=5.3 (13G020302010AK) 2 x SCREW FOR WIFI CARD (13G020305011AK) 1 x I/O Shield (13G020563000AK) 1 x I/O Shield THIN (13G020563010AK)

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.

• Drivers
• BIOS
• Manual